Owner`s manual

4
Enclosure Installation
Caution! Read All Instructions and Warnings Before Installation!
WARNING: The rack enclosure is extremely heavy. Do not attempt to unpack, move or install the enclosure without assistance. Until it has been properly
installed and stabilized, the enclosure is prone to tipping and could cause property damage and/or personal injury. Use extreme caution when handling the
enclosure and be sure to follow all handling and installation instructions. Do not attempt to install equipment without first stabilizing the enclosure.
Preparation
Theenclosuremustbeinstalledinastructurallysoundareawithalevelfloorthatisabletobeartheweightoftheenclosure,alltheequipmentthatwillbeinstalledinthe
enclosureandanyotherenclosuresand/orequipmentthatwillbeinstallednearby.Beforeunpackingtheenclosure,youshouldtransporttheshippingcontainercloserto
thefinalinstallationlocationtominimizethedistanceyouwillneedtomovetheunitaftertheprotectivepackaginghasbeenremoved.Ifyouplantostoretheenclosure
foranextendedperiodbeforeinstallation,followtheinstructionsintheStorage and Service section.
Youneedseveraltools(user-supplied):
• 13mmOpen-endWrench
• 18mmOpen-endWrench
• UtilityBlade
• Carpenter'sLevel
• Phillips-headScrewdriver
• 5/32"AllenWrench
Youalsoneedthefollowinghardware(included):
• (60)Phillips-headMountingScrews(M6x5/8")
• (60)CageNuts(M6)
• (60)NylonCupWashers
Unpacking
NOTE: If the enclosure is an “SP1” model with a shock pallet, follow the special unpacking instructions attached to the shipping container instead of the
unpacking instructions in this section. All warnings still apply.
1
 Confirmthattheshippingcontainerisuprightandstable,thenuseautilitybladetocuttheshrink-wrap
 securingthecornerprotectors.Applytheutilitybladedirectlyoverthecornerprotectorstopreventthe
 utilitybladefromscratchingtheenclosureorcuttingtheheavyprotectiveplasticbagbeneaththeshrink-
wrap. WARNING: Do not scratch the enclosure or cut the heavy plastic bag beneath the shrink-wrap.
Do not push or pull the enclosure while unpacking.
2
 Removethecornerprotectors.Saveallpackingmaterials(includingthepallet)forlateruseunless
 youarecertaintheywillnotberequired.Thepackingmaterialsarerecyclable.
3
 Removetheheavyplasticbagsurroundingtheenclosure.Examinetheenclosureforanydamageorloose
parts. Confirm that all parts are present. If anything is missing or damaged, contact Tripp Lite for
 assistance.Donotattempttousetheenclosureifithasbeendamaged.
1
2
3