Owner`s manual

12
Equipment Installation
Installing or Removing Cage Nuts
WARNING: The flanges of the cage nuts should engage the sides of the square opening in the rail, not the top and bottom. Follow the instructions in your
equipment documentation to ensure proper installation of your equipment.
Installing Cage Nuts
1
 Locatethenumberedsquareopeningsinthemountingrailswhereyouplantoinstallyourequipment.You
 willinstallcagenuts(included)intothesquareopeningsinordertoprovideanattachmentpointforthe
 mountingscrews(included).Note: Consult your equipment documentation to determine how many cage
nuts will be required and where they will need to be installed.
2
 Fromtheinsideofthemountingrail,insertoneoftheflangesofthecagenutthroughthesquareopening.
 Pressitagainstthesideofthesquareopening.Eachflangeshouldengageonesideofthesquareopening,
 notthetoporbottom.
3
 Compressthecagenutatthesidesslightlytoallowtheremainingflangetofitthroughthesquareopening.
 Whenthecagenutisproperlyinstalled,bothflangeswillprotrudethroughthesquareopeningandwillbe
 visibleontheoutersurfaceofthemountingrail.Repeatsteps1-3untilallrequiredcagenutsareinstalled.
4
 Afterinstallingtherequiredcagenuts,usetheincludedmountingscrewsandcupwasherstosecureyour
 equipmenttotherackrail.Placethecupwashersbetweenthescrewsandtheequipmentmountingbrackets.
Note: Your equipment may also include mounting hardware. Read the mounting instructions that came with
your equipment before installing your equipment.
To Remove Cage Nuts, Reverse Steps 1-3
Note: You may wish to use a cage nut tool (user-supplied) to aid cage nut installation and removal.
20
19
18
22
21
20
19
18
22
21
20
19
18
22
21
20
19
18
22
21
1
2
3
4