Datasheet

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification,
event logging and running user-defined script commands
Offers simultaneous monitoring through included USB and DB9 interface ports, or the monitoring by any number of additional servers over
IP
Emergency Power Off (EPO) interface with cable
Supports Tripp Lite's WatchDog software application (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary
Two year warranty
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
3000
Output kVA capacity (kVA) 3
Output Watt Capacity
(watts)
2250
Output kW capacity 2.2
Output power factor 0.8
Nominal Output
Voltage(s) Supported
230V
Frequency compatibility 50 / 60 Hz
Output voltage regulation
(line mode)
-15%, +8%
Output voltage regulation
(Battery mode)
+/- 5%
Built-in UPS output
receptacles
8 C13 outlet(s); 1 C19 outlet(s)
Included output power
cables
Includes 3 C13 to C14 output power cables
Built-in controllable
switched load banks
Three switchable two-outlet C13 load banks
Output circuit breaker 10A (x2) - each breaker protects 4 C13 outlets, C19 outlet is unbreakered
Basic PDU options PDUNV (1U / 2 C19, 12 C13 outlets)
Metered PDU options PDUMV20HV (0U / 6 C19, 32 C13 outlets)
Switched PDU options PDUMH20HVNET (1U / 8 C13 outlets); PDUMV20HVNET (0U / 4 C19, 24 C13 outlets)
PDU recommendation
notes
All noted SWITCHED and METERED PDUs require C19 to C20 input cable (P036-006 or similar)
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT