Datasheet

Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked
computers by automatically switching UPS power off and back on again
Communication ports support on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current,
battery capacity, internal UPS temperature and line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown,
activate self-test and 10 second reboot of connected equipment
3 individual customized load management receptacles can be individually powered off and back on again via software interface to reboot remote
equipment or shed less critical loads to extend battery runtime for the most critical equipment
Built-in Emergency Power Off (EPO) interface supports emergency shutoff in large facilities
Hot-swappable/user replaceable batteries allow on-site battery replacement without powering off connected equipment
UPS battery set ships fully assembled and ready for use, no time consuming, connection of individual internal batteries by user is necessary
Specifications
SELECTOR
Selector Type UPS SYSTEMS
General Info
Product Group UPS SYSTEMS
TAA Compliant No
OVERVIEW
UPS Family SmartPro Network
UPS Type Line-Interactive
OUTPUT
Output Volt Amp Capacity (VA) 2200
Output kVA Capacity (kVA) 2.2
Output Watt Capacity (Watts) 1600
Output kW Capacity (kW) 1.6
Power Factor 0.7
Nominal Output Voltage(s)
Supported
120V
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line
Mode)
-18% / +8%
Output Voltage Regulation (Battery
Mode)
+/- 5%
Output Receptacles (7) 5-15R; (2) 5-15/20R; (1) L5-20R
Load Management Receptacles Three switchable single-outlet 5-15R load banks
2 / 6