Datasheet

the built-in ability to shutdown any number of additional servers over IP
Built-in Emergency Power Off (EPO) interface with cable
NEMA 5-20P input plug / NEMA 5-15R & NEMA 5-15/20R output receptacles
Integrated 3 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (1 outlet
per load bank)
Front panel LEDs offer current monitoring and battery charge level information
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
2200
Output kVA capacity (kVA) 2.2
Output Watt Capacity
(watts)
1920
Output kW capacity 1.92
Output power factor 0.87
Output Capacity Details Output de-rates to 1800w at 110V and 1670w at 100V nominal settings
Nominal Output Voltage(s)
Supported
100V; 110V; 120V
Nominal Voltage details 120V default (voltage selection via back panel dipswitches)
Frequency compatibility 50 / 60 Hz
Frequency compatibility
details
Supports 60Hz at 110V and 120V nominal and 50/60Hz (auto-sensing) at 100V nominal.
Output voltage regulation
(line mode)
-14%, +6%
Output voltage regulation
(Battery mode)
+/- 5%
Built-in UPS output
receptacles
4 5-15R outlet(s); 4 5-15/20R outlet(s)
Built-in controllable
switched load banks
Three switchable single-outlet 5-15R load banks
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
Rated input current (at
maximum load)
16A (120V), 16.4A (110V), 16.7A (100V)
Nominal Input Voltage(s)
Supported
100V AC; 110V AC; 120V AC
UPS input connection type 5-20P
Input circuit breaker 20A
UPS Input cord length (ft.) 10
UPS Input cord length (m) 3