Specification Sheet

DC-TO-AC INVERTER/CHARGERS
4
Go to www.tripplite.com for the latest product and ordering information
PowerVerter APS Inverter/Chargers
• Upto3,600WattsContinuousand
7,200WattsPeakSurgeOutput
• AutomaticTransferfromACSource
toReliableBatteryBackupPower
• ProtectionAgainstBlackouts,Surges,
LineNoiseandUnstableVoltages
Provide Reliable Backup Power
Inverter/Chargers have all the features of Inverters, plus a battery charger and automatic transfer
switch that allow you to use batteries separate from a vehicle’s main battery or outside a vehicle
entirely. They provide mobile power, emergency power and backup power for generators
and other AC sources. They are especially useful for off-grid locations and vehicles that have
intermittent access to AC “shore power,” such as boats, RVs and transport trucks.
APS2448UL UT2012UL
3-Stage Charging Profile
When an AC source like a generator or shore power is available, the Inverter/Charger conditions AC power before passing
it to your equipment and simultaneously charges your user-supplied batteries. When an AC source is not available (during
power failures, at remote sites, while driving, when disconnected from shore power or when your generator is turned off),
the Inverter/Charger automatically switches to battery power and your equipment
continues to operate without interruption.
AC
DC
Inverter/Charger
Shore Power
Deliver Superior
Output
Inverter/Chargers provide stable
output voltage and frequency
to protect your equipment and
allow it to perform at its peak.
The Inverter/Charger acts as a
safety buffer, conditioning unstable
power from AC sources like
generators before it reaches your
equipment. When Inverter/Chargers
operate from battery, the AC output
is controlled by a microprocessor to
provide reliable power at all times.
Charge Batteries
Faster
An advanced 3-stage charger
recharges your batteries faster,
while protecting them against
over-charge, over-discharge and
accidental depletion. You can
connect as many batteries as you
need to increase battery backup
runtime to match any application.
PowerVerter APS Inverter/Chargers handle your
equipment’s peak power demands at startup and
during use without shutting down.
Handle Peak Power
Demands
Many power tools, appliances and
electronics require brief bursts of
power that exceed their continuous
wattage ratings, either at startup,
during use or both. Inverter/
Chargers temporarily provide extra
output power to handle these peak
surge demands without shutting
down. By providing ample reserve
power, Inverter/Chargers support a
much wider range of equipment and
applications.
Startup Peak
Usage Peak(s)
Equipment Load
Time
Watts
200% Output
150% Output
Continuous Output