Owner`s manual

8PV
HI
MED
LOW
LOW
MED
HI
REMOTE
REMOTE
OFF
ON
LOAD
SENSE
GREATER
LOAD
ON
LESSER
LOAD
ON
BATTERY
LOAD
Try these remedies for common Inverter problems before calling for assistance. Call Tripp Lite Customer Service at [phone] before
returning your unit for service.
Troubleshooting
SYMPTOM PROBLEMS CORRECTIONS
No AC Output Operating Mode Switch is set to “OFF.” Set Operating Mode Switch to “REMOTE” or “ON.”
(All Indicator Lights Are OFF)
User-supplied UL-listed external DC input fuses have blown. Replace fuses.
Red Battery Indicator Light Unit has shut down due to excessive battery discharge. Run your engine to raise battery voltage. Check external battery
Is Rapidly Flashing connections and fuse. Reset by moving Operating Mode Switch
(¼ Second Flashes) to “OFF.” Wait one minute and switch to “REMOTE” or “ON.”
If unit remains in shutdown mode after several attempts to reset
contact Tripp Lite Customer Service for assistance.
Red Load Indicator Light Unit has shut down due to overload. Reduce load. Reset by moving Operating Mode Switch to “OFF.”
Is Rapidly Flashing Wait one minute and switch to “REMOTE” or “ON.” If unit remains in
(¼ Second Flashes) shutdown mode after several attempts to reset contact Tripp Lite
Customer Service for assistance.
Connected Equipment Experiences Audio/Video interference. Reposition equipment antennas and Inverter.
Buzzing Sound Or Picture Distortion
Inverter Output Seems Intermittent Loose cable connections. Check and secure all connections.
Operating Mode Switch
Battery Indicator Lights
Load Indicator Lights
200403074 93-2237
Limited Warranty
Tripp Lite warrants its Inverters to be free from defects in materials and workmanship for a period of one year (domestic) or 120 days (export) from the date of retail purchase by end user.
Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty you must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized
Tripp Lite service center. Products must be returned to Tripp Lite or an authorized Tripp Lite service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of pur-
chase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way, including opening of the unit’s casing for any reason. This warranty applies only to the orig-
inal purchaser who must have properly registered the product within 10 days of retail purchase.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclu-
sion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POS-
SIBILITY OF SUCH DAMAGE. Specifically, Tripp Lite is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Service
If you are returning your Inverter to Tripp Lite, please pack it carefully, using the ORIGINAL PACKING MATERIAL that came with the
unit. Enclose a letter describing the symptoms of the problem. If the Inverter is within the warranty period, enclose a copy of your sales
receipt. To obtain service you must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized Tripp Lite
service center.
Your Inverter requires no maintenance and contains no user-serviceable or replaceable parts, but should be kept dry at all times. Periodically
check, clean and tighten all cable connections, as necessary, both at the unit and at the battery.
Maintenance