Owner`s manual

6
Installation
Static IP Address Assignment
4-5
Congure PDU in Terminal Mode: Afterabriefpause,aninitializationpageshould
appearintheterminalemulationprogram.Pressanykeyonthekeyboardwithin5seconds
tochangethePDUsettings.
Note: If the 5-second period has elapsed, you can reboot the PDU by:
1. Using a small tool or paper clip to press the recessed Reset button on the PDU for 3 seconds.
2. Pressing any key during, or after, the boot process. This will prompt for a login name and password.
The default user name and password for this process are both “localadmin.” After logging in, type
“reboot” to initiate the card reboot.
Press A to Accept the settings, or M to Modify? M
Enter the root password: *********
Reset configuration and root password to default values. (Y/N)? N
Network Settings
FollowthepromptstocongureIPv4andIPv6addresssettings.Thedefaultterminalmode
passwordisTrippLite.SampleIPsettingsareshown—supplyyourownIPinformationwhenyou
congureyourcard.
ETHERNET INTERFACE SETTINGS:
Obtain IPv4 settings automatically using DHCP for Ethernet interface? [Y]
IP address? [10.1.0.165]
Subnet mask? [255.0.0.0]
Gateway address? [10.0.0.1]
Enable DHCPv6 for the Ethernet interface? [Y]
Enable static IPv6 for the Ethernet interface? [N]
IPv6 address? [2001:DB8::1:58:4F43:4849:544C]
Network prefix length? [64]
DNS server? [10.0.0.8]
This card’s host name? [poweralert-061033462177]
This card’s domain? [tlsoftwaredev.local]
13-02-027-933161-revB.indb 6 2/7/2013 1:19:14 PM