Owner`s manual

CONFIG
A B
ACCY
10
RJ-45 Conguration Port: Usethisporttoprovideadirectterminal
connectiontoacomputerwithaterminalemulationprogram.AnRJ-45
cableisincludedwiththePDU.Ifyouneedareplacementcable,visit
www.tripplite.com for ordering information.
RJ-45 ACCY Port: Reserved for future use.
Ethernet Port: UsethisRJ-45jacktoconnectthePDUtothenetwork
withastandardEthernetpatchcable.TheLinkLED
A
andStatusLED
B
indicateseveraloperatingconditions,asshowninthetablebelow.This
port is not compatible with PoE (Power Over Ethernet) applications.
NetworkOperatingConditions
A
Link LED Color
Off NoNetworkConnection
FlashingAmber 100MbpsNetworkConnection
FlashingGreen 10MbpsNetworkConnection
B
Status LED Color
Off CardNotInitialized
SteadyorFlashingGreen CardInitializedandOperational
SteadyAmber Error-CardNotInitialized
Features
Mounting Brackets: UsethesebracketstomountthePDU.
SNMP Reset Button: Presstheresetbuttonwithasmalltoolorpaper
clipfor3secondstorebootthePDU’snetworkcard.Rebootingthe
networkcardwillnoterasenetworksettingsorinterruptACpower.
PS/2 Port: UsethisporttoconnectaTrippLiteENVIROSENSE
environmental sensor to provide remote temperature/humidity monitoring
andadrycontactinterfacetocontrolandmonitoralarm,securityand
telecomdevices.Visitwww.tripplite.comfororderinginformation.Note:
Do not connect a keyboard or mouse to this port.
13-02-027-933161-revB.indb 10 2/7/2013 1:19:20 PM