Instructions

LINE L1-L2
L1-
L2
Bank 1
2-2
2-3
2-4
A
4
Installation
Connecting the PDU
2-1
Each model is equipped with 1 of 2 different input plugs.
IEC 309 32A
BLUE (2P + E)
L6-30P
Model Name Input Plug
Max Input
Amps (Limited by
Input Cord and Plug)
Input
Voltage
Range
Output
Voltage
Range Breakers
Cord
Length Outlets
PDUMV30HV2 L6-30P 24A 200-240V 200-240V
2 x Double
Pole, 20A
Branch-Rated
10 ft.
(3 m)
48 Total:
2 Banks of (4) C19
and (20) C13
PDUMV32HV
IEC 309 32A
BLUE (2P + E)
32A 200-240V 200-240V
2 x Single
Pole, 20A
Branch-Rated
48 Total:
2 Banks of (4) C19
and (20) C13
2-2
Connect the input plug to your facility’s
compatible AC power source.
2-3
Connect your equipment’s input plugs to
the appropriate outlets on the PDU.
Note: It is recommended that you do not
connect a live load to the PDU. If the load you
intend to connect has an ON/OFF switch, please
turn the switch to OFF prior to connection.
2-4
Optional Cord Retention Procedure
Use the included C14 and C20 plastic
sleeves to secure plugs to receptacles.
Attach the sleeve to the plug, making
sure that the pull tabs
A
remain outside
the plug and that the fit is secure. To
unplug equipment properly, use the pull
tabs to remove the plug and sleeve from
the receptacle.
L6-30P
N (Blue) L [Φ] (Brown)
Ground
(Green/
Yellow)
21-03-406-93338D.indb 421-03-406-93338D.indb 4 4/1/2021 1:41:28 PM4/1/2021 1:41:28 PM