Owner`s manual

3
Switched Rack PDU Features
•Networkinterfaceenablesremotepowermonitoringandindividualoutletcontrol
•Individuallycontrollableoutletsallowremoterebootingoflocked-upnetworkdevices
•Digitalampmeterforon-siteloadmonitoring
•CentralizedmanagementofhundredsofPDUsandenvironmentalsensorswithTrippLite’s
freePowerAlertNetworkManagementSystem
•OptionalENVIROSENSEaccessoryallowsmonitoringofnetworkambienttemperature,
humidity and up to three dry contacts
•Toollessbutton-mountinstallationinTrippLiteSmartRackandmanythird-partyenclosures
Mounting the PDU
Note: The illustrations may differ somewhat from your PDU model. Regardless of configuration, the user must
determine the fitness of hardware and procedures before mounting. The PDU and included hardware are
designed for common rack and rack enclosure types and may not be appropriate for all applications. Exact
mounting configurations may vary. Screws for attaching the mounting brackets and cord retention shelf to the
PDU are included. Use only the screws supplied by the manufacturer, or their exact equivalent (#6-32, ¼"
flat head).
IfinstallingthePDUinarackthathasbutton-mountslots,youonlyneedtoperformstep
1-1
.
Ifyourrackenclosuredoesnothavebutton-mountslots,proceedtostep
1-2
.
Installation
1-1
ToinstallthePDUinarackequipped
withbutton-mountslots,insertthe
mountingbuttonsontherearofthe
PDUintothebutton-mountslotson
therackandslidethePDUdownuntil
themountingbuttonsengagethe
narrowsectionoftheofthebutton-
mount slots.
Note: To install the PDU with its outlets
facing the rear of the rack, use the
included PDUMVROTATEBRKT accessory.
This V-shaped bracket provides a mounting
button on one leg of the V and a button-
mount slot on the other, effectively
repositioning the mounting buttons. See
Features section for image.
1-2
Attachthemountingbracketstothe
PDU.
1-3
(Optional)Attachthecordretention
bracket(s)tothePDU.
1-4
AttachthePDUtoaverticalrailin
yourrackorrackenclosure.(Usethe
mounting hardware that came with
yourrackorrackenclosuretoattach
themountingbracketstotherail.)
1-2
1-1
1-3 1-4
13-11-194-933093.indb 3 12/5/2013 5:21:54 PM