Owner`s manual

10
Configuration and Operation
Remote Monitoring and Control
ThePDUprovidesremotemonitoring
A
,
outlet control
B
andmoreviaWebbrowser,
telnetandSNMP-basedNetwork
ManagementSystems.Formoreinformation
aboutconfigurationandoperationofthe
PDUviathePowerAlertWebbrowser
interface,refertotheSNMPWEBCARDUser's
Guide,includedontheCD-ROMbundled
withthePDU.
Features continued
PS/2 Port: UsethisporttoconnectaTrippLiteENVIROSENSE
environmental sensor to provide remote temperature/humidity
monitoring and a dry contact interface to control and monitor
alarm,securityandtelecomdevices.Visitwww.tripplite.comfor
orderinginformation.Note:Donotconnectakeyboardormouse
to this port.
RJ-45 Configuration Port: Usethisporttoprovideadirect
terminal connection to a computer with a terminal emulation
program.AnRJ-45cableisincludedwiththePDU.Ifyouneeda
replacementcable,visitwww.tripplite.comforordering
information.
Ethernet Port: UsethisRJ-45jacktoconnectthePDUtothe
networkwithastandardEthernetpatchcable.TheLinkLED
A
andStatusLED
B
indicateseveraloperatingconditions,as
showninthetablebelow.This port is not compatible with PoE
(Power Over Ethernet) applications.
Network Operating Conditions
A
Link LED Color
Off NoNetworkConnection
FlashingAmber 100MbpsNetworkConnection
FlashingGreen 10MbpsNetworkConnection
B
Status LED Color
Off CardNotInitialized
SteadyGreen CardInitializedandOperational
FlashingAmber Error-CardNotInitialized
A
B
A
B
13-11-194-933093.indb 10 12/5/2013 5:22:06 PM