Owner`s manual

4
Connecting the PDU
2-1
Plug the PDU into a Compatible
Electrical Outlet: (120VL5-30R
forModelPDUMH30NET;
208/230VL6-30RforModels
PDUMH30HVNET&
PDUMH30HV19NET;IEC3092P
+EforModelPDUMH32HVNET).
2-2
Connect Equipment to the PDU's
Output Receptacles: Plug
equipmentintotheNEMA
5-15/20R(ModelPDUMH30NET),
IEC60320C13(Models
PDUMH30HVNET&
PDUMH32HVNET)orIEC60320
C13&C19(Model
PDUMH30HV19NET)output
receptaclesofthePDU.TheLED
A
near each output receptacle will
illuminate when the receptacle is
readytodistributeliveACpower.
The digital load meter
B
maybe
set with the switch
C
to display in
ampsthePDU'stotalconnected
load(alloutlets),ortheload
carriedbyeithertheupperorlower
bankofoutletreceptacles.When
the total connected load display is
selected,bothofthegreenLEDsto
the right of the display
D
will
illuminate.Whenthetopbank
displayisselected,onlythetop
LEDwillilluminate;whenthe
bottombankdisplayisselected,
onlythebottomLEDwillilluminate.
2-3
Cord Retention (Optional): Ifyou
attached the cord retention shelves
(STEP
1-3
),usethemtosecure
equipment power cords. Attach
eachcordtotheretentionshelfby
looping the cord and securing it to
an attachment point with one of
theincludedcableties.Makesure
that each equipment power cord
canbeunpluggedfromthePDU
withoutremovingthecabletie.
Installation
2-1
2-2
2-2
2-2
2-3
Your model may vary.
DB A
C
BC D A
C B D A
201105095 93-3048.indb 4 6/15/2011 3:07:23 PM