Owner`s manual

3
Installation
Mounting the PDU
Caution! Before mounting the PDU, ensure that a compatible, easily
accessible and properly grounded AC outlet is available in the location.
ThePDUsupportstwomountingconfigurations:2URackandUnder-Counter.
Note: Regardless of configuration, the user must determine the fitness of hardware and procedures before
mounting. The PDU and included hardware are designed for common rack and rack enclosure types and may
not be appropriate for all applications. Exact mounting configurations may vary. Screws for attaching the
mounting brackets and cord retention shelf to the PDU are included. Use only the screws supplied by the
manufacturer, or their exact equivalent (#8-32, 3/8” flat head screw for mounting bracket, #6-32, 1/4” flat
head screws for cord retention shelf).
1-1
2U Rack Mounting: Attach the
includedbracketstothesidesof
thePDU(STEP
1A
)withthe
included screws. After installing the
brackets,positionthePDUinthe
rackandinstallfouruser-supplied
screwsthroughtheunit'sbrackets
(STEP
1B
)andintotherackrails
as shown.
1-2
Under-Counter Mounting: Use4
included screws
A
to attach each
ofthe2mountingbrackets
B
to
thePDUasshown.MountthePDU
underthecounterbyinserting2or
moreuser-suppliedscrews
C
throughthemountingbrackets
D
and into secure mounting points.
1-3
Cord Retention Shelves
Attachment (Optional): Use
included screws
A
to attach the
cord retention shelves
B
to the top
andbottomofthefrontpanelof
thePDUasshown.
1A
1-2
1B
1-2
1-3
A
B
D
C
B
A
201105095 93-3048.indb 3 6/15/2011 3:07:22 PM