Owner`s manual

2
Installation
Note: The illustrations may differ somewhat from your PDU model.
1
Determine Installation Configuration.
The PDUs covered by this owner’s manual
supporttheseinstallationconfigurations:2U,
1Uand0Urackmount;wall-mountandunder-
counter. See below for installation
configurations pertaining to your specific
model.Chooseaconfigurationandfollowthe
installation instructions in the appropriate
sectionofStep1beforeproceedingtoStep2.
Note: Regardless of installation
configuration, the user must determine the
fitness of hardware and procedures before
mounting. The PDU and included hardware
are designed for common rack and rack
enclosure types and may not be appropriate
for all applications. Exact mounting
configurations may vary.
1-1
2U Rack Installation. Attach the
includedbracketstothesideofthePDUwith
theincludedscrews(A).Afterinstallingthe
brackets, position the PDU in the rack and
installfouruser-suppliedscrewsthroughthe
unit’sbracketsandintotherackrails(B).
1-2
1U Rack Installation.AttachthePDU
to the rack by inserting four user-supplied
screws (A) through the PDU mounting
brackets(B)andintothemountingholesof
therackrailasshown.
1-3
0U Rack Installation.Part1:Remove
the screws (C) attaching the mounting
bracketstothePDU,changetheorientation
of the brackets as shown and reattach the
brackets. Use only the screws supplied by
the manufacturer or their exact equivalent
(#6-32, 1/4” flat head). Part 2: Attach the
PDU vertically by inserting two or more
user-supplied screws (A) through the PDU
mounting brackets (B) and into mounting
pointsintherackorrackenclosure.
1-4
Wall Installation.AfterrepeatingPart1
above,attachthePDUtoastablemounting
surface by inserting two or more user-
supplied screws (A) through the PDU
mounting brackets (B) and into secure
mountingpointsonthemountingsurface.
1-5
Under-Counter Installation. After
repeatingPart1above,attachthePDUtoa
stable mounting surface by inserting four
user-supplied screws (A) through the PDU
mountingbrackets(B)andintosecuremountingpointsonthemountingsurface.
A
B
B
A
C
A
B
C
B
C
A
C
A
1-1
B
1-5
1-4
1-2
1-3
201103062 93-3059.indd 2 4/29/2011 2:33:40 PM