Owner`s manual

1C
2C
Installation continued
3C
5
Surface Mounting
1C
Attach the included mounting
bracketstothesidesofthePDU
with the included screws. Note: If
you need to change the
orientation of the PDU to match
the mounting surface, rotate the
mounting brackets in 90°
increments as required before
attaching.
2C
MountthePDUtoastablesurface
by inserting four user-supplied
screwsthroughthebracketears
and into appropriate mounting
holes.Makesurethemounting
surface and screws are capable of
supporting the combined weight of
thePDUandanyattached
equipment cords.
3C
Attach Cord Retention Brackets
(Optional): Attach the cord
retentionbracketstothePDUwith
the included screws.
13-04-262-93323D-EN.indd 5 5/10/2013 3:02:34 PM