Owner`s manual

A B
6
Features continued
Mounting Brackets: Usethesebracketstomountthe
PDU.
PS/2 Port: UsethisporttoconnectaTrippLite
ENVIROSENSEenvironmentalsensortoprovideremote
temperature/humidity monitoring and a dry contact
interfacetocontrolandmonitoralarm,securityand
telecomdevices.ContactTrippLiteCustomerSupportat
(773)869-1234fororderinginformation.Note: Do not
connect a keyboard or mouse to this port.
Configuration Port:Usethisporttoprovideadirect
terminal connection to a computer with a terminal
emulationprogram.Aconfigurationcable(partnumber
73-1243)isincludedwiththePDU.Ifyouneedtoorder
areplacementcable,contactTrippLiteCustomerSupport
at(773)869-1234.
Ethernet Port: UsethisRJ-45jacktoconnectthePDU
tothenetworkwithastandardEthernetpatchcable.The
LinkLED
A
andStatusLED
B
indicate several operating
conditions,asshowninthetablebelow.This port is not
compatible with PoE (Power Over Ethernet) applications.
Network Operating Conditions
A
LinkLEDColor
Off NoNetworkConnection
FlashingAmber 100MbpsNetworkConnection
Flashing Green 10MbpsNetworkConnection
B
StatusLEDColor
Off CardNotInitialized
SteadyGreen CardInitializedandOperational
FlashingAmber Error-CardNotInitialized
12-10-311 93-327B.indb 6 12/13/2012 4:09:21 PM