Owner`s manual

4 0

5 i 5 i

8 0

C F

C – F C – F

I 2

Using the Digital Display

These options are only available when a sensor such as Tripp Lite’s ENVIROSENSE is attached

(sold separately). Press Mode button to toggle between options and data within a menu. A

momentary press of the arrow buttons switches between menus. A long press skips between

measurement categories. The scrolling pattern of the display is outlined below.

Scrolling Through Temperature Readings (Measurement Category)

Humidity (%RH)Temperature (T)

Temperature Unit Options (Conguration Category)

3 Seconds

Hold Mode button for 3 seconds to

switch between options. The letter

in the 2-digit display indicates the

selected unit, C for Celsius and F for

Fahrenheit.

Press Mode button to toggle between options and data within a menu. A momentary press of the

arrow buttons switches between menus. A long press skips between measurement categories.

The scrolling pattern of the display is outlined below.

Scroll Function Options (Conguration Category)

When enabled, the Auto Scroll

function displays data for

Input Phases, Load Unbalance

and Load Banks in 4-second

intervals. Y indicates the

function is enabled; N indicates

that it is disabled. Pressing any

button interrupts the auto scroll

function, allowing the user to

navigate between menu options.

If no button is pressed, there is

a 10 second timeout.

Note: Hold Mode button for 3

seconds to switch between options.

The letter in the 2-digit display

indicates the selected option.

To LED

Bright-

ness

13-09-017-9332B8.indb 13 9/5/2013 4:26:54 PM