User`s guide

9
3. Web Console continued
3.5 Device Menu continued
3.5.4 Device > Events
The ‘Events’ page displays all of the available events associated with a device.
Event Category
This specifies the severity level for the event. The user may choose to
give the event a different severity level. The valid values for category are:
•CRITICAL
• WARNING
•INFORMATION
Enable/Disable Event
This allows the user to no longer consider this event an alarm event.
Disabling the event will cause this event to no longer create an alarm
and the actions will no longer fire when this event occurs. The default is
for all events to be enabled.
3.5.5 Device > Device Discovery
To search for additional devices, click [Execute] at the bottom of the
page. This feature can be used when adding a Tripp Lite ENVIROSENSE
temperature and humidity probe. Once the probe is connected to the
SNMPWEBCARD, press the [Execute] button and the probe will appear
as a device in the device list.
Figure 3-12: Events
Figure 3-13: Device Discovery