User`s guide

84
4. Telnet/SSH Console continued
4.4 Alarms and Logging continued
4.4.2.1 Data Log continued
-------- Device Selection Menu ----------------------------------------------
1- Choose from All Device Variables
2- Choose Variables From Device 1 (SU1500RTXL2Ua)
3- Choose Variables From Probe (Envirosense)
X- Data Log Filter
M- Return to Main Menu
<ENTER> Refresh Menu
>> 2
Data Log Filter Device Variable Selection Menu Example
-------- Device Variable ----------------------------------------------------
Filter on a maximum of 3 variables.
Filter On : Only Variables for Device 1
1- Battery Charge Remaining
2- Battery Minutes Remaining
3- Battery Temperature (C)
4- Battery Temperature (F)
5- Battery Voltage
6- Input Voltage
7- Input Voltage 1
8- Input Voltage 12
9- Input Voltage 2
10- Input Voltage 3
11- Output Current
12- Output Current 1
13- Output Current 2
14- Output Current 3
15- Output Load
16- Output Load 1
17- Output Load 2
18- Output Load 3
19- Self Test Date
X- Data Log Filter
M- Return to Main Menu
<ENTER> Refresh Menu
Time Ranges
The valid values are “Display All Entries” or “Choose Time Range.”
Display All Entries
All of the entries in the log will be displayed.
Choose Time Range
The display will be limited to the chosen time range.
Oldest Entry Display Date and Time
No entries in the log that occurred before this date and time will be
displayed. The default is the date and time of the first entry recorded in
the log.
Oldest Entry Date
The oldest entry date is specified in the format YYYY-MM-DD.
Oldest Entry Time
The oldest entry time is specified in 24-hour clock format of
HH:MM[:SS].
Newest Entry Display Date and Time
No entries in the log that occurred after this date and time will be
displayed. The default is the current time.
Newest Entry Date
The newest entry date is specified in the format YYYY-MM-DD.
Newest Entry Time
The newest entry time is specified in 24-hour clock format of
HH:MM[:SS].
Clear Log
This option will clear all of the entries in the data log.