User`s guide

79
4. Telnet/SSH Console continued
4.3 Network Configuration continued
4.3.3 User Interfaces
These menus control how the various available SNMPWEBCARD interfaces are started.
4.3.3.2 Web Console
Menu Data
Automatically Start HTTPS
This menu asks if when the card is started, the HTTPS Web access
should be started as well. Valid Values:
• Yes
Start the application.
• No
Do not start the application.
HTTPS Port
If the application is to be started, then this is the listening port to use.
The default is 443.
Automatically Start HTTP
This menu asks if when the card is started, the HTTP Web access
should be started as well. Valid Values:
• Yes
Start the application.
• No
Do not start the application.
HTTP Port
If the application is to be started, then this is the listening port to use.
The default is 80.
4.3.3.1 Telnet/SSH
This menu provides configuration access to the way the user and
system interact with the Telnet/SSH interface.
Menu Data
Automatically Start SSH Menu
This menu asks if when the card is started, should the SSH Menu
application be automatically started as well. Valid Values:
• Yes
Start the application. The default is Yes.
• No
Do not start the application.
SSH Menu Port
If the application is to be started, then this is the listening port to use.
The default is 22.
Automatically Start Telnet Menu
This menu asks if when the card is started, should the Telnet Menu
application be automatically started as well. Valid Values:
• Yes
Start the application. The default value is Yes.
• No
Do not start the application.
Telnet Menu Port
If the application is to be started, then this is the listening port to use.
The default is 23.
Automatically Start SSH CLI
This asks if when the card is started, should the Telnet Menu
application be automatically started as well. Valid Values:
• Yes
Start the application. The default value is Yes.
• No
Do not start the application.
SSH CLI Port
If the application is to be started, then this is the listening port to use.
The default is 2112.
Automatically Start Telnet CLI
This asks if when the card is started, should the Telnet Menu
application be automatically started. Valid Values:
• Yes
Start the application. The default value is Yes.
• No
Do not start the application.
Telnet CLI Port
If the application is to be started, then this is the listening port to use.
The default is 5214.