User`s guide

78
The values in this menu are optional Watchdog settings that can be
defined to verify the availability and accessibility of the network.
-------- Watchdog Settings ------------------
Ping Probe Settings
Enabled : No
Interval : 3
Tries Before Fail : 3
Primary Address :
Secondary Address :
NTP Probe Settings
Active : No
Interval : 3
Tries Before Fail : 3
Primary Address :
Primary Port : 125
Secondary Address :
Secondary Port : 0
1- Ping Probe Active
2- Ping Probe Interval
3- Ping Probe Tries Before Fail
4- Ping Probe Primary Address
5- Ping Probe Primary Address
6- NTP Probe Enabled
7- NTP Probe Interval
8- NTP Probe Tries Before Fail
9- NTP Probe Primary Address
10- NTP Probe Primary Port
11- NTP Probe Secondary Address
12- NTP Probe Secondary Port
A- Apply Changes
X- Remote Services
M- Return to Main Menu
<ENTER> Refresh Menu
4.3 Network Configuration continued
4.3.2.3 Watchdog Settings
Menu Data
Ping Probe Settings
Up to two addresses may be defined to periodically ping to determine
the health of the network.
• Enabled
If yes, the Ping Probe is active.
• Interval
This setting is used to define how often, in minutes, a ping will be
performed.
• Tries Before Fail
This is the number of times that the ping will be attempted before
it is considered to be a failed ping attempt.
• Primary Address
This is the primary address that will be pinged.
• Secondary Address
This is the secondary address that will be pinged.
NTP Probe Settings
This defines up to two addresses that can be sent an NTP request to
determine the health of the network.
• Enabled
If yes, the NTP Probe is active.
• Interval
This setting is used to define how often, in minutes, an NTP
request will be sent.
• Tries Before Fail
This is the number of times that the NTP request fails before
considering the test to be a failure.
• Primary Address
This is the primary address to send the NTP request.
• Primary Port
This is the port for the primary address.
• Secondary Address
This is the secondary address to send the NTP request.
• Secondary Port
This is the port for the secondary address.
4. Telnet/SSH Console continued