User`s guide

74
4. Telnet/SSH Console continued
4.3 Network Configuration continued
4.3.2.1 Email Settings continued
Menu Data
Server Name
This defines the email server address information used for sending out
email messages.
Port
This defines the port on the email server used for sending out email
messages.
Authentication Login Name
If authentication is required by the email server, this is the login name
to use. This is optional.
Authentication Password
If authentication is required by the email server, this is the password
for the authentication login name. If a Authentication Login Name is
specified, then the Authentication Password must also be provided.
Digest MD5 Authentication Supported
This indicates if the email server supports Digest MD5 Authentication.
CRAM MD5 Authentication Supported
This indicates if the email server supports CRAM MD5 Authentication.
Login Authentication Supported
This indicates if the email server supports Login Authentication.
Plain Authentication Supported
This indicates if the email server supports Plain Authentication.
From Address
This is the information to be used as the “From” address in the message.
Subject
This is the information to be used as the “Subject” line in the message.
Include Triggering Event
This is a flag to indicate if information about the triggering event should
be included in the email message if it is available. Values are:
• Yes
Include the data in the email message.
• No
Do not include the data in the email message.
Include Device
This is a flag to indicate if the device that the event occurred on should
be included in the email message if it is available. Values are:
• Yes
Include the data in the email message.
• No
Do not include the data in the email message.
Include Host
This is a flag to indicate if the host address for the event that occurred
should be included in the email if it is available. Values are:
• Yes
Include the data in the email message.
• No
Do not include the data in the email message.
Include Location
This is a flag to indicate if the device location for the event that oc-
curred should be included in the email if it is available. Values are:
• Yes
Include the data in the email message.
• No
Do not include the data in the email message.