User`s guide

4. Telnet/SSH Console continued

4.3 Network Conﬁguration continued

4.3.1.5 DNS Settings

This menu allows the user to deﬁne only one DNS server, though there may be up to two DNS servers on the system. If DHCP is used for either the

IPV4 or IPV6 address, a DNS server will be deﬁned by DHCP. The user-deﬁned DNS server will always be in the list.

-------- DNS Settings ----------------------------------------------------------

Current DNS Address Information

===============================

-----------------------------------------------------------------------------

# | Address

-----------------------------------------------------------------------------

1 ::FFFF:8.8.8.8

2 2001:DB8::2:0:0:0:2

Settings On Restart

===================

DNS Address : 8.8.8.8

1- DNS Address

X- IP Configuration

M- Return to Main Menu

<ENTER> Refresh Menu

Note: The user-deﬁned DNS address may be entered in IPV4 or IPV6 format, but will be resolved to an IPV6 address format and will be displayed

as such. In the above menu example, the address 8.8.8.8 was entered, but is displayed in its IPV6 format of ::FFFF:8.8.8.8.