User`s guide

7
3.4.3 Status > Alarms
This submenu provides a listing of all active and/or unacknowledged
alarms.
By default, only active alarms will be displayed on this page, as the
software will automatically mark the alarm acknowledged upon receipt
of the matching clear alarm. To change this, deselect the option to
auto acknowledge alarms. Upon de-selection of this option, alarms will
remain in this list until they are acknowledged individually by clicking on
the ‘Ack’ column for the alarm, or clicking the [Acknowledge all] button.
Note: An alarm must be inactive in order for it to be acknowledged and
disappear from the alarm list.
3.5.1 Device > Controls
Controls available on the selected device in the device list appear in the
‘Select A Control’ section of the page.
Click on a control and, if parameters are necessary to execute the
control, the parameters required will appear to right of the selected
control. Enter the data in the value field and the click the [Execute]
button on the bottom of the page.
Available commands include “Reboot Device,” “Initiate Self-Test,”
“Operating System Restart,” “Start Ramp Sequence,” “Start Shed
Sequence,” etc. For a complete list of commands available for your
device, refer to the ‘Select A Control’ menu.
3. Web Console continued
3.5 Device Menu
The device menu is used to enact different commands or configurations
for individual devices.
3.4 Status Menu continued
Figure 3-8: Alarms
Figure 3-9: Controls