User`s guide

4. Telnet/SSH Console continued

4.3 Network Conﬁguration

The Network Conﬁguration menu is used to conﬁgure the network-related items such as the IP Conﬁguration of IPV4 and IPV6 Addresses,

Remote Services such as Email Settings and the User Access Information, which deﬁnes what user service should be run (HTTP, SSH or Telnet).

All changes to the Network Conﬁguration will be enacted upon the next restart of the web card.

-------- Network Configuration -------------------------------------------------

1- IP Configuration

2- User Access Interfaces

3- Remote Services

X/M- Return to Main Menu

<ENTER> Refresh Menu

-------- IP Configuration ------------------------------------------------------

Host Name : mypoweralertcard

Domain Name : tlsoftwaredev.local

IPV4 Address Information

========================

Home eth0

Method STATIC

IPV4 Address 10.11.0.111

Subnet Mask 255.0.0.0

IPV6 Address Information

========================

Home Method IPV6 Address Prefix Length

-------- -------- ------------------------------ --------------

eth0:1 STATIC 2001:DB8::1:58:4F43:4849:544C 64

eth0:3 AUTO FE80::240:9DFF:FE43:3597 64

eth0:4 AUTO 2001:DB8::1:240:9DFF:FE43:3597 64

eth0:5 NONE :: 0

eth0:6 NONE :: 0

eth0:7 NONE :: 0

1- Host Name

2- Domain Name

3- IPV4 Settings

4- IPV6 Settings

5- DNS Settings

X- Network Configuration

M- Return to Main Menu

<ENTER> Refresh Menu

4.3.1 IP Conﬁguration

This menu allows the user to have full control over the IP settings of the SNMPWEBCARD and how it interacts with the network. Both IPV4 and

IPV6 addresses are supported.