User`s guide

4. Telnet/SSH Console continued

4.2 System Conﬁguration continued

4.2.3.3 RADIUS Servers continued

Menu Data

4.2.4 Date/Time

-------- Date/Time -------------------------------------------------------------

Current Date/Time : 2011-08-12 16:27:50-05:00

Time Source : Network Time Protocol

1- Time Source

2- Time Settings

3- NTP Settings

4- RTC Settings

X/M- Return to Main Menu

<ENTER> Refresh Menu

4.2.4.1 Time Source Data Entry Menu

This menu will allow the user to switch between using Network Time Protocol (NTP) or Real Time Clock (RTC) for the time. Using NTP, the system

will poll an NTP server for the time. Using RTC, the values will be determined from local RTC settings.

-------- Time Source -----------------------------------------------------------

Time Source : Network Time Protocol

R- Switch To RTC

X- None

M- Return to Main Menu

<ENTER> Refresh Menu

Address

This deﬁnes the internet address of the RADIUS server.

Priority

This is a number that deﬁnes the priority of this RADIUS server.

Shared Secret

This is the shared secret value to be used with this RADIUS server.

Authentication Port

This deﬁnes the port on the server to be used for authentication.

Accounting Port

This deﬁnes the port on the server to be used for accounting.

4.2.3.4 Change Password

This menu is used to allow a user to change his or her user password. The user will be prompted for the old password, then the new password and

then ﬁnally asked to verify the new password again. The new password will take effect for the next login.