User`s guide

6
3. Web Console continued
3.4 Status Menu continued
3.4.2 Status > Details
The content of this screen will vary based upon the protocol of the device.
This screen contains the device variable data. Any editable variables will
be displayed at the top of the list. The editable variables have a white
value box. This section of variables is sorted by purpose and within each
purpose, by variable name.
Customizing the device functionality can be done through Behavior,
Personal, and Threshold menus on the left side of the screen. These
menus allow settings and threshold information to be changed to meet
individual needs. Some options are modified by clicking on a cell and
the then selecting the appropriate value, and some will require a typed
value in the cell. Click [Save] when you have finished making changes.
Device Name
Purpose
• ThevalidvaluesforPurposeare:
o Behavior – configuration information that defines device
behavior
o Equipment – information describing the device
o Personal – configurable identifying information
o Status – device status information
o Threshold – a threshold for a device event
Group
• Each device has a group to categorize the variable. Devices in
general will not have variables in all groups but will have variables in
multiple groups. The following are the valid group values:
o Battery – the variable is associated with the device's battery
o Bypass – the variable is associated with the device's bypass
o Contact – the variable is associated with a contact closure
sensor input
o Device
o Environment
o Input
o Load
o Output
o System
o Watchdog
Value
• This is the current value of the variable. Values include Enabled,
Disabled and numeric values depending on the device.
Figure 3-6: Device Status
Figure 3-7: Device Behavior