User`s guide

4. Telnet/SSH Console continued

4.1 Device Menu continued

4.1.5.3 Ramp/Shed Settings continued

Menu Data

Ramp Action

This is the action to take when a ramp is initiated. The valid values are:

•RemainOff

•TurnOnAfterDelay

Ramp Delay

This is the delay before taking the ramp action.

4.1.6 Preferences and Thresholds

This menu contains the device and protocol speciﬁc data that deﬁnes the user's preferred behavior settings and thresholds. Since this menu is

used to deﬁne the user's preferences, the values here should be editable.

Preferences and Thresholds Menu

-------- Preferences and Thresholds --------------------------------------------

Auto Restart On Shutdown : Enabled

Auto Restart On Delayed W : Enabled

Auto Restart On Low Volta : Enabled

Auto Restart On Overload : Disabled

Auto Restart On Overtemp : Disabled

14 Day Self-Test : Disabled

Watchdog Status : Disabled

Watchdog Time : Disabled

Low Battery Warning : %

Low Battery Warning : 0.0 Years

1- Auto Restart On Shutdown

2- Auto Restart On Delayed Wakeup

3- Auto Restart On Low Voltage

4- Auto Restart On Overload

5- Auto Restart On Overtemp

6- 14 Day Self-Test

7- Low Battery Warning

8- Battery Age Alarm Threshold

X- Device Main Menu

M- Return to Main Menu

<ENTER> Refresh Menu

Shed Action

This is the action to take when a shed is initiated. The valid values are:

•RemainOn

•TurnOffAfterDelay

Shed Delay

This is the delay before taking the shed action.