User`s guide

ManualsBrandsTripp Lite Manualselectrical equipment & suppliesPDU3VS6L2120

Menus

Main Menu

The main menu is the starting menu when a user accesses the Telnet interface. It contains the entry point for all of the pieces of the system data.

All other menus are accessible from the main menu.

To help keep the user informed about active alarms, the current list of active alarms is always displayed as part of the main menu.

--------------------------------------------------------------------------------

-------- ALARMS ----------------------------------------------------------------

No active alarms present

-------- Main Menu -------------------------------------------------------------

1- Devices

2- System Configuration

3- Network Configuration

4- Alarms and Logging

5- About

Q- Logout

<ENTER> Refresh Menu

4. Telnet/SSH Console continued

4.1 Device Menu

If there is more than one device, the ﬁrst menu displayed for “Device” is a choice of which device's data you would like to present. The data on all of

descendant menus will refer to the device chosen. If there is only one device, this choice is skipped and all descendant menus will obviously apply

to the sole device.

In order to access the device menu structure the user must have at least read permission for the DEVICE STATUS facility. Any additional permissions

needed in the submenus of this structure will be indicated for that menu.

Device List Menu

-------- Device List -----------------------------------------------------------

1- Device 1 (SMART750RM1U)

2- Probe (Envirosense)

X/M- Return to Main Menu

<ENTER> Refresh Menu -----------------------------------------------------------------

Device Main Menu

-------- Device 1 -------------------------------------------------------------

Device Name : Device 1

Location : Region :

Vendor : TRIPPLITE Product : SMART750RM1U

Protocol : 3003 Date Installed : 2011-07-31

State : CRITICAL Type : UPS

Port Mode : RS232 Port Name : /com/1

Firmware Version : 2264 (Rev A) Serial Number :

Device ID : 1280 Self Test Date :

Self Test Status : Done and Pass

1- Status

2- Identification

3- Controls

4- Events

5- Loads

6- Preferences and Thresholds

7- Device Alarms

8- Logs

X- Device List Menu

M- Return to Main Menu

<ENTER> Refresh Menu