User`s guide

18
3. Web Console continued
3.8 Preferences continued
3.8.1 Preferences > Network continued
Internet
This menu can be used to monitor and alter IPv4 and IPv6 settings such
as the addresses in use and the settings on system restart.
Changes made in this menu will require a system reboot.
3.8.3 Preferences > Security
This menu is used to define user-supplied Security preferences for
individual logins, authentication methods, Radius servers, SSL and
more.
Change Password
This menu allows individual users to change their password for security
reasons. The user must enter their username, current password, new
password and then confirm the new password.
You must press [Save] in order for the changes to take effect.
Figure 3-30: Internet Preferences
Figure 3-32: Change Password
Figure 3-31: DNS Preferences
3.8.2 Preferences > DNS
This menu is used to configure information for DNS services. If you
are using hostnames instead of IP addresses for ANY communications,
you MUST specify a valid DNS server IP address here. Failure to do so
will result delayed or missed emails or other alerts, and generally slow
performance of SNMPWEBCARD.
DNS Settings In Use
This list shows the DNS servers currently used by SNMPWEBCARD.
DNS Settings
Enter the IP address of the DNS server that will be providing lookup
services for SNMPWEBCARD. If you omit this a default publicly-available
DNS server will be provided.
Host
Enter the Host name you wish to identify this card by. The default is
generated at manufacturing time and need not be changed.
Domain
Enter your domain name or leave blank.