User`s guide

12
3. Web Console continued
3.6 Actions Menu continued
3.6.1.1 Actions > Event Actions > Device Actions continued
Ramp Actions
A ramp action is a device specific action that can be executed when an
alarm trigger occurs. An example of a ramp action could be that when
a UPS returns from an on battery event, the event trigger would be ‘On
Utility Power,’ to execute the ramp settings set on the controllable loads.
Ramp settings are defined on the Device-Loads page. The amount of
controllable loads available on devices will vary from device to device.
To add an action, click the [+] button to activate a row and enter the
appropriate data. To delete an action, click on the action that is to be
deleted and then click the [-] button and confirm the deletion and then
the [Save] button to commit the changes.
Shed Actions
A shed action is a device specific action that can be executed when an
alarm trigger occurs. An example of a shed action could be that when
a UPS goes to battery, the event trigger would be ‘UPS on Battery,’ to
execute the shed settings set on the controllable loads. Shed settings
are defined on the Device-Loads page. The amount of controllable loads
available on devices will vary from device to device.
To add an action, click the [+] button to activate a row and enter the
appropriate data. To delete an action, click on the action that is to be
deleted and then click the [-] button and confirm the deletion and then
the [Save] button to commit the changes.
Figure 3-18: Ramp Actions
Figure 3-19: Shed Actions