Owner`s manual

2-3 2-4
(PDU3MV6L2120, PDU3MV6L2130, PDU3MV6L2120B)
(PDU3MV6L2120LV, PDU3XMV6G16)
(PDU3MV6H50, PDU3MV6H50A)
A
INPUT (AMPS)
L1 L2 L3
LOAD (AMPS)
L1 L2 L3
LOAD (AMPS)
L1-L2 L2-L3 L3-L1
5
2-3
Connect your equipment’s input plugs to
the appropriate outlets on the PDU.
Note: It is recommended that you do not
connect a live load to the PDU. If the load
you intend to connect has an ON/OFF
switch, please turn the switch to OFF prior to
connection.
2-4
(Optional) If you attached the cord
retention bracket(s), tie each equipment
power cord to the retention bracket.
Attach each cord to the retention shelf
by looping the cord and securing it with
one of the included cable ties
A
. Make
sure each cord can be unplugged from
the PDU without removing the cable tie.
Installation
Digital Load Meter
Input Amps: The total aggregate
current (in Amps) drawn by
each of the PDU phases will be
displayed independently by 1 of
3 digital meters.
Load Amps: The total aggregate
current drawn (in Amps by
the load bank associated with
each phase will be displayed
independently by 1 of 3 digital
meters.
12-130 933145.indb 5 8/10/2012 1:30:22 PM