Owner`s manual

These connections are optional. Your UPS will function properly without these connections.

Phone Line or Phone/Network

Line Surge Suppression

Your UPS has jacks which protect against

surges on a phone line. Select models feature

jacks which also protect against surges on a network

line. Using appropriate telephone or network

cords connect your wall jack to the UPS jack

marked “IN.” Connect your equipment to the UPS

jack marked “OUT.” Make sure the equipment

you connect to the UPS’s jacks is also protected

against surges on the AC line.

USB Communications

Use any USB cable to connect the USB port of

your computer to the USB port of your UPS.

Download the PowerAlert UPS monitoring

software program appropriate for your operating

system from www.tripplite.com and install it on

your computer.

External Battery Connection

(select models)

All UPS models come with a robust internal

battery system; select models feature connectors

that accept an optional external battery pack

(sold separately from Tripp Lite*) to provide

additional runtime. Adding an external battery

will increase recharge time as well as runtime.

See battery pack owner’s manual for complete

installation instructions. Make sure cables are

fully inserted into their connectors. Small sparks

may result during battery connection; this is normal.

Do not connect or disconnect battery pack when

the UPS is running on battery power.

* See Specifications section for battery pack available for

your specific UPS model.

Optional Installation

NORM DELAY

OMNIVS1500XL shown

200609032 93-2248 OMNIVS1000 Update.qxd 9/7/2006 4:25 PM Page 4