Owner`s manual

3
Quick Installation
Plug the UPS into an outlet
that doesn’t share a circuit
with a heavy electrical load.*
* An air conditioner, refrigerator, etc.
NOTE! after you plug the UPS into a live AC
outlet, the UPS will turn ON automatically.
See “ON/OFF” Button description in the
Basic Operation section if you want to
place the UPS in any mode other than ON.
Plug your equipment into
the UPS.
The outlets will provide battery backup
and surge protection; plug your computer,
monitor and other critical devices here.*
The outlets will provide surge protection
only; plug your printer and other non-
essential devices here.
* Your UPS is designed to only support computer equipment.
You will overload the UPS if the total VA ratings for all the
equipment you connect to the (A) outlets exceeds the UPS’s
Output Capacity (see Specifications). To find your equipment’s
VA ratings, look on their nameplates. If the equipment is
listed in amps, multiply the number of amps by 120 to
determine VA. (Example: 1 amp × 120 = 120 VA). If you
are unsure if you have overloaded the (A) outlets, run a
self-test (see “MUTE/TEST” Button description).
B
A
NORM DELAY
1
2
1
A
A
B
2
NORM DELAY
2
A
A
B
OMNIVS1500XL shown
OMNIVS1000 shown
NORM DELAY
2
A
A
B
OMNIVS800 shown
200609032 93-2248 OMNIVS1000 Update.qxd 9/7/2006 4:25 PM Page 3