Installation guide

The hotkey functions
2-6
Removing a computer from the scanning sequence
To remove a computer from the scanning sequence:
1. Type 000 in the SCN column.
2. Press Esc.
Constantly displaying the Confirmation label
To constantly display the computer Confirmation label:
1. Type 999 in the DSP column.
2. Press Esc.
The KB column
The KB column shows the keyboard mapping settings. Set the KB mapping for each computer according to its
operating system.
The default KB mode is PS, which is the standard keyboard mapping for Windows and Linux based operating
systems.
For a UNIX operating system using a standard PS/2 keyboard, set the KB mapping as follows:
• U1 for HP UX and SGI
• U2 for Alpha UNIX and Open VMS
To change the KB column from PS to U1 or U2:
1. Navigate to the KB field by using the Tab or Arrow keys.
2. Press the Spacebar. The display interchanges between PS, U1 and U2. Find the desired setting.
3. Press Esc.
The MS column
The Phantom system automatically detects the mouse types, and configures the system accordingly.
Timeout period
The Management keyboard, mouse and screen are automatically disabled after a preset time of non-use. This
Timeout period is set in the OUT column of the Setup window (F3).
By default the OUT column is 060, meaning the Time Out function is set to 60 seconds.
To change the Timeout period:
1. From the Select Computer window press F3. The Setup window appears.
2. Navigate with the Tab or Arrow keys to the OUT column of the desired computer.
3. Type the desired time span (minimum 030 seconds maximum 998 seconds).