Installation guide

Verifying the Remote version number
6-4
Figure 6-5 The OSD Manager option
The H/W Version button is grayed out, as there is no hardware relevant to the OSD.
The Phantom Manager version number
To verify the Phantom Manager version number:
1. Open the Phantom Update program.
2. Activate the Firmware Upgrade mode on the Manager OSD.
3. In the Manager Unit box, check the Phantom Manager option.
4. Click
. The firmware version number appears in the Manager Unit box.
5. Click
. The hardware version number appears in the Manager Unit box.
The Phantom MX II Switch version number
To verify the Switch version number:
1. Open the Phantom Update program.
2. Activate the Firmware Upgrade mode on the Manager OSD.
3. In the Manager Unit box, check the Phantom Switch option.
4. Click
. The version number appears in the Manager Unit box.
Verifying the Remote version number
Before you can check a remote computer, you must uncheck the Manager Unit box options.
To verify the Remote version number:
1. Open the Phantom Update program.
2. Activate the Firmware Upgrade mode on the Manager OSD.
3. Check one or more or all of the remote computers.
4. Click
. The firmware version number appears after the computer number.
5. Click
. The hardware version number appears after the computer number.