Specification

Specifications
incremental hardware damage, data corruption and audio/video transmission problems. The BC450
incorporates technology that filters out disruptive line noise so that it won’t affect your equipment.
Home-Friendly Alarm and Diagnostic LED Report Real-Time Status
The UPS remains silent in both line and battery backup modes. The alarm sounds only to report low
battery, excessive load or fault condition. An LED indicator points out operating mode and fault status at a
glance.
High-Efficiency Operation Helps You Save Energy and Cut Costs
A high >98% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy
costs.
Compact Housing for Convenient Installation Almost Anywhere
The space-saving ABS housing fits on a desktop, shelf or anywhere else convenient to your workstation
or home theater. Keyhole mounting tabs on the rear allow easy wall-mount installation. The five-foot
power cord with NEMA 5-15P plug connects to any compatible AC outlet.
OVERVIEW
UPC Code 037332238283
UPS Type Standby
OUTPUT
Output Volt Amp Capacity (VA) 450
Output Watt Capacity (Watts) 255
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 50 / 60 Hz
Output Voltage Regulation (Line
Mode)
120V (±20%)
Output Voltage Regulation (Battery
Mode)
120V (±10%)
UPS Output Receptacles (Surge
Suppression Only)
4 UPS outlets, 4 surge-only outlets
Output AC Waveform (AC Mode) Pure sine wave
Output AC Waveform (Battery
Mode)
PWM sine wave
Nominal Output Voltage(s)
Supported
110V; 115V; 120V
Output Receptacles (8) 5-15R
Individually Controllable Load Banks No
INPUT
Rated input current (Maximum Load) 6A
Nominal Input Voltage(s) Supported 120V AC
2 / 5