User Guide

resolution
Features a built-in Equalization control for adjustment of the video image
Further expand the range and number of monitors by using a B140-110 repeater unit
Add up to four remote units(three repeaters and one active receiver) to each channel of the B140-002 or B140-004, for a total of 4 displays per
channel.(An active receiver should be the last unit in a channel)
A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be
extended up to 175 ft.
HDCP compatible
Compatible with all operating systems
Plug and play; no software or drivers required
Compliant with the Federal Trade Agreements Act(TAA) for GSA Schedule purchases
Specifications
OVERVIEW
Cable Type DVI; HDMI; UTP (Cat5, Cat5e, Cat6, Cat6a)
PHYSICAL
Unit Dimensions (hwd / in.) 1 x 2.5 x 3.6
Unit Dimensions (hwd / cm) 2.54 x 6.35 x 9.14
Included Mounting Accessories Yes
CONNECTIONS
Connector A RJ45 (FEMALE)
Connector B DVI-I (FEMALE)
Ports 1
WARRANTY
Product Warranty Period (Worldwide) 1-year limited warranty
© 2015 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
http://www.tripplite.com/products/product-certification-agencies
5V, 2A)
Owner's Manual
2 / 2