Datasheet

Double Boostâ„¢ inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification chart)
OverPowerâ„¢ inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions
3 stage, selectable 5/20 amp battery charger with adjustable settings for wet/gel battery types
Dual C13 output receptacles pass 120V line power or inverter output through to connected equipment
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full
battery charge when AC is present without auto transfer and SYSTEM OFF settings
Set of 6 front panel LEDs display continuous status
Set of 4 dip switches support wet/gel battery charging profiles, charger enable/inhibit, and selectable 144/163/182/201V AC low voltage auto transfer
during brownouts
Set of 4 additional dip switches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger
low/high settings
Resettable 3A charger AC input breaker and resettable 4A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and
temperature related failures
Automatic overload and thermal (overheating) shutoff
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory)
Specifications
General Info
RoHS Y
OVERVIEW
Style Heavy-duty with built-in battery charger
OUTPUT
Frequency Compatibility 50 Hz
Output Receptacles (2) Universal outlets
Output (Watts) 750
Continuous Output Capacity (Watts) 750
Peak Output Capacity (Watts) 1500
Output Nominal Voltage 230V
Output Voltage Regulation
LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output Frequency Regulation 50 Hz (+/- 0.3 Hz)
Overload Protection Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads
INPUT
Nominal Input Voltage(s) Supported 230V AC
2 / 4