User Manual

3
Feature Identification
Identifythepremiumfeaturesonyourspecificmodelandquicklylocateinstructionsonhowtomaximizetheiruse.
Configuration DIP Switches: optimize Inverter/Charger
operation depending on your application. See Configuration
section for setting instructions.
Operating Mode Switch: controls Inverter/Charger operation.
The “AUTO/REMOTE” setting ensures your equipment
receives constant, uninterrupted AC power. It also enables the
Inverter/Charger to be remotely monitored and controlled with
an optional remote module (Tripp Lite modelAPSRM4,sold
separately).The“CHARGEONLY”settingallowsyourbatteries
to return to full charge faster by turning the inverter off which
haltsbatterydischarging.SettingtheOperatingModeSwitchto
the "DC OFF" (center) position will de-energizethe unit and
connect "AC OUT" to "AC IN." See Operation section for
setting instructions.
“LINE”, “INVERT”, “LOAD” LEDs: intuitive “traffic light”
signals show whether the Inverter/Charger is operating from AC
line power or DC battery power. It also warns you if the
connectedequipmentloadistoohigh.SeeOperationsectionfor
instructions on reading the indicator lights.
"BATT VOLTAGE" LEDs: these three lights will turn on in
severalsequencestoshowapproximatebatterylevel.SeeOperation
section for instructions on reading the indicator lights.
DC Power Terminals: connect to your battery terminals. See
Battery Connection section for instructions.
Hardwire AC Input/Output Terminals: securely connect the
Inverter/Charger to vehicle or facility electrical system input and
output.SeeACInput/OutputConnectionsectionforinstructions.
Resettable Circuit Breakers: protect your Inverter/Charger against
damageduetooverloadorchargerfailure.SeeOperationsection
for resetting instructions.
Remote Control Module Connector: allows remote monitoring
andcontrolwithanoptionalmodule(TrippLitemodelAPSRM4,
sold separately). See remote module owner’s manual for
connection instructions.
Battery Charge Conserver (Load Sense) Dial: conserves
battery power by setting the low-load level at which the Inverter/
Charger’s inverter automatically shuts off. See Configuration
section for setting instructions.
Multi-Speed Cooling Fan: quiet, efficient fan prolongs equipment
service life.
Hardwire AC Input/Output Cover Plate
Battery Temperature Sensing Connector (side mounted, not
shown): prolongs battery life by adjusting charge based on
batterytemperature.Usewithincludedcable.SeeConfiguration
section for details.
DC Power Terminal Cover Plate
1
2
3
4
5
6
7
8
9
Front View
10
11
12
13
OUTPUT/NEUTRAL
OUTPUT/HOT
GROUND
INPUT/NEUTRAL
INPUT/HOT
“FOR USE WITH COPPER WIRE ONLY”
1
24 3
5
8 910
13
6
11
12
7