Owner`s manual

7
Enclosure Configuration
Adding or Removing Front and Rear Doors
WARNING: Do not attempt to add or remove doors without assistance.
Removing Door
1
 Disconnectthedoor'sgroundwire.
2
 Openthedooruntilitisperpendicular(90degrees)tothefrontoftheenclosure.
3
Lift the door from the hinges and remove it from the enclosure.
To Reinstall Door, Reverse Steps 1-3
(Optional)Iftheenclosureisjoinedtoanotherenclosure,turnthedoorbacktowardtheenclosureasyou
lift it from the hinges.
Reversing Front Door
WARNING: Do not attempt to reverse the front door without assistance.
1
Remove the screw connecting the ground wire to the inside of the door.
2
Remove the 2 screws connecting the door handle to the door. Remove the door handle.
90°
1
2
3
1
2
201112001_L 93-2723.indd 7 12/14/2011 11:27:20 AM