Specification

USB-Bug™ USB Tester and Data Masker
• Connect the USB-Bug inline between the power
source and the device you are trying to charge.
• Test Power (0 to 99.9W), Voltage (3.2 to 30VDC)
and Current (0 to 3A) on USB 2.0 and USB 3.0
charging ports with over-voltage, under-voltage
and over-current indicators
• Measure capacity (in mAh) to verify output of
portable battery pack
• This displays as a cumulative number and is
useful when determining how quickly/effectively
a portable battery charger is working.
• Built-in Smart Chip for Intelligent Charging that
allows it to determine the safest maximum
current your PD can accept.
• Dual output for charging two USB devices off of
one USB 3.0 port; One port is a specially
designed masked port to charge your phone
or tablet without any data being transferred
Ordering Information:
USB-Bug USB-Bug, USB Tester and Data Masker
Features:
Designed to test the power, voltage, and current
of USB 2.0 or USB 3.0 charging ports.
850 Perimeter Road • Manchester, NH • [phone] • [e-mail]
USB PLUG
USB Port Parameters
Operating Voltage
Over Voltage Indicator
Under Voltage Indicator
Current
Over Current Indicator
Working Current
Measurement Accuracy
Measurement Rate
USB Cable Length
Dimensions
(1) USB-A Male Plug
(2) USB-A ports (1 with data and power pass through;
the other only power pass through
3.2-30VDC
Greater than or equal to 5.6 VDC
Less than or equal to 4.4VDC
0 to 3A
Greater than or equal to 5.6VDC
Less than 20mA
±1%
2 readings/second
~4.7” (120mm)
2.7 x 1 x 4.7” (69 x 26 x 120mm)
Specifications
F IYT IN