Full Product Manual

Manual Datalogging
Manual datalogging allows the user to store and recall up to 99 readings with
the press of a button.
4. Press the [MEM] button to manually store a single reading into
memory. The display will flash 3 times and the memory location
number will be displayed below the humidity reading.
5. To view stored readings, press and hold the [RECHOLD] button for 2
seconds and “RECALL” will blink next to the memory location number
on the display.
6. Press the [MEM] button to manually increment through the stored
readings.
7. Press [RECHOLD] + [MEM] for more than 1 second to clear the
memory.
8. Press [RECHOLD] for more than 1 second to return to normal
operation.
Note: In RECALL mode, pressing the [M
in
/AVRST ] button for min/max/avg
readings will auto search the stored readings in memory and display
the minimum, maximum and average values of the stored readings.
RS-232 PC Communications Interface
The meter is equipped with an RS -232 PC interface jack (3.5mm phono) for
connection to a PC for Data Acquisition.