Full Product Manual

Why?

Microprocessor is fail

Solution

Contact distributor for after service

E33

Why?

In humidity display of model 3&4 only,

means humidity measuring is fail

Solution

Contact distributor for after service

Why red LED is flashing but recorded data is OK

Why?

Alarm detection works every 10 seconds but

data logging are possibly programmed as

every 2 hours. In this condition, if alarm

happens between two logging points, it

might lead the recorded data is OK but red

LED is flashing, especially if the alarm mode

is set as “Single”.

Solution

To program the alarm function as

cumulative can reduce this situation

Warranty Information

Triplett / Jewell Instruments extends the following warranty to the original purchaser of

these goods for use. Triplett warrants to the original purchaser for use that the products sold

by it will be free from defects in workmanship and material for a period of (1) one year from

the date of purchase. This warranty does not apply to any of our products which have been

repaired or altered by unauthorized persons in any way or purchased from unauthorized

distributors so as, in our sole judgment, to injure their stability or reliability, or which have

been subject to misuse, abuse, misapplication, negligence, accident or which have had the

serial numbers altered, defaced, or removed. Accessories, including batteries are not

covered by this warranty