Full Product Manual

Weight ~90g

Battery 2PC 3.0V CR2032

Sampling Interval 30 seconds, 5, 10, 30, 60, 90, 120 minutes

Start delay 0, 5, 30, 45, 60, 90,120 minutes, 24 hours

Alarm range Temp: -30.0~70.0

C Humidity:1~99%rH

Baro:300~1100hpa

Alarm delay 0, 5, 30, 45, 60, 90, 120 minutes

Alarm type Single, Cumulative, Disable

Operation keys 3 Keys, Start/Stop & Mark & MX/Mn

LED indicator REC, High /Low alarm

Protection class

Model 2: IP65

Directives EN12830

Operating System Windows only

Error Codes

- - - - . -

Why?

In model 2 only.

External probe is unplugged

Solution

Check the contact between probe and logger

E02

Why?

Measured value is below specified range

Solution

Put the logger in specified range

E03

Why?

Measured value is above specified range

Solution

Put the logger in specified range

E04

Why?

In humidity display of model 3 & 4 only,

means temperature is in error mode

Solution

Solve the error issue of temp. sensor

E11

Why?

In humidity display of model 3 &4 only,

means humidity calibration is fail

Solution

Re-calibrate the humidity

E31