Specification

CM200 200A AC True RMS Open Jaw Clamp
• True RMS provides better accuracy when
measuring non-sinusoidal or noisy waveforms
• 0.6” (16mm) clamp jaw
• Built-in Non-Contact Voltage Detector with LED
• LoZ (impedance) mode for identifying ghost voltages
• Data Hold freezes the display
• Auto power off with disable
• Built-in Flashlight
• Includes Test Leads, 2 AA batteries
• 1-year warranty
• Theopenjawclamphasasmallerproleandcan
 tintospacesthatastandardclampmeterjawcan’t
• Typically when using a multimeter to measure current,
you would have to “break the circuit” and place the
meter in series with it, so that voltage and current
would pass through it. A clamp meter allows you to
easily measure current without breaking the circuit by
clamping around a single conductor. This saves time
and the circuit will not be damaged.
Ordering Information:
CM200 200A AC True RMS Open Jaw Clamp
CM200-NIST CM200withCerticateofTraceabilitytoNIST
Features:
Applications:
Open jaw design ts into tight spaces
where a standard clamp can’t close
850 Perimeter Road • Manchester, NH • [phone] • [e-mail]
Specifications
CAT IV
600V
Display counts
AC Current
ACA Accuracy
AC Voltage
Resistance
Capacitance
Continuity
LoZ (Low Impedance)
NCV Detector
Safety Category
Dimensions / Weight
6000 count
200A
±3%
1000V
60MΩ
4mF
<50Ω
Yes
Yes
CAT IV-600V
9.1 x 2.5 x 1.7” (230 x 64 x 43.3mm) / 7.8oz (220.6g)