User Manual

CamView IP Pro Series Combined User Manual 39

www.Triplett.com

Information and Measurement Display Area — Results and type of testing are shown

here, including Vpp, type of measurement, etc. Shows up to 20,000

Test Type Selector — Press the ¡ ¢ keys to select DC Voltage (V), AC Voltage (V

), DC

Current (A), AC Current (A

), Resistance (W), Capacitance (-||-), Diode Forward

Voltage (

|-), or Continuity ( ) test.

Auto Ranging or Manual Ranging Selector — Press Focus+/- to activate Auto Rang-

ing, or the Up or Down Arrow Keys to activate and set Manual Ranging.

Relative — Press Zoom+ to enable and disable Relative function.

Hold — Press Zoom- to enable and disable Hold function.

History and Record — Press Iris- to switch between Waveform and History. Waveform

shows the Waveform. itself. History shows the change in current/voltage/etc. over

time. You will likely want to use the History setting if you are looking for peaks or

drops. Press SCR to start and stop recording.

Wave Display Area — Displays either the waveform or history.