User Manual

34 CamView IP Pro Series Combined User Manual

www.Triplett.com

4.7.3 Upgrading Firmware and Identifying Current Firmware Version

IP and Analog camera standards are constantly evolving, therefore it is important that you keep

your Tester up-to-date with the most recent ﬁrmware. Follow these steps to update the ﬁrmware:

STEP 1: Power Up the Tester

Press the Power Button on the side of your Tester to turn it on if it is not already powered on.

STEP 2: Connect to the Internet

Plug an ethernet cable into Network Port 2, and plug the other end of the ethernet cable into a

network that has Internet access. Wait for the light on the LINK/ACT on Network Port 2 to ﬂash

before moving on to the next step. (If the network you are plugging into is using DHCP, the Tester

will automatically detect the IP Settings. Otherwise, you will need to manually apply the IP settings.

Consult your Network Administrator if you need assistance.)

STEP 3: Select the Settings Screen

On the Main Menu, highlight “Settings” using the Down Arrow Key. Once the “Settings” option is

highlighted, press the Right Arrow Key to access the Device Settings screen.

STEP 4: Select the System Upgrade function

While on the Device Settings screen, scroll down to the System Upgrade option using the Up or

Down Arrow Keys, then press the Right Arrow Key to access the Check Upgrade screen. Your

current ﬁrmware version will show on this screen.