User Manual

16 CamView IP Pro Series Combined User Manual
www.Triplett.com
Network Port 1 Status Information — Also referred to as the Blue Bar, all of the
information for the camera connected to Port 1 (blue RJ45 port on the side of the Tester)
will show in this row.
Network Port 2 Status Information — Also referred to as the Green Bar, all of the
information from the network connected to Port 2 (green RJ45 port on the side of the
Tester) will show in this row.
IP Test Information — Also referrred to as the Gray Bar, this area shows the IP informa-
tion and status of the Tester and clients.
Available Operations for Link Testing — Follow the on-screen instructions to access or
modify specific settings, such as:
• Set Link Speed — Press Zoom+/- to modify link speed
• Self DHCP — Press Focus- to enable Self-generating DHCP. Use if no
network is set up yet and you are connecting directly to a camera. The
Tester will set the local IP to static, start the DHCP server, and wait for a
remote DHCP request from the camera. DO NOT USE if connecting
through an existing network as this will cause an IP conflict.
• Manual IP — Press SET button to enter Manual IP screen
• Search DHCP — Press Iris- to have the tester request DHCP from an
existing network. The server’s assigned address will show in the gray bar.
37
38
39
40
37
38 46
39
40
41 42 43 44
45